2.4Ghz 2W WiFi Bluetooth Sweep Signal Source VCO RF Generator RF Power Amplifier For 2.4G BT Headset Music Speaker Wifi Camera

Description

2.4Ghz 2W WiFi Bluetooth Sweep Signal Source VCO RF Generator RF Power Amplifier For 2.4Ghz BT Headset Music Speaker Wifi Camera

Very simple to use
Step 1: Insert 2.4G antenna and tighten it
Step 2: Insert the DC5V 1-2A power supply (Please do not use fast charging sockets)

Refer to our testing video Only supports 2.4G devices

Does not support dual band WIFI only can work 2.4Ghz wifi frequency or 2.4G Bluetooth

Note:

The antenna must be plugged in first. Otherwise, the power amplifier will be burned out due to the excessive standing wave. And the antenna frequency must be matched

PS: if long distance is required, please use directional antenna : about interference distance 0-15M

INPUT voltage : type-c USB 5V 1A-2A DC   (Please do not use fast charging sockets)

Input power: about 10W

Output power: 32~33dBm

Output interface: SMA outer screw inner hole

Size: length*width*height (without connector)=10*5*4cm
Remarks: Before powering on the 2.4G antenna, it is recommended to add air cooling when working for a long time.